Modules

Go To HOME UP

       INPUT MODULES

  OUTPUT MODULES

bulletLMM1S
bulletLMR1S
bulletMIC1X
bulletMIC1S
bulletMIC2X
bulletMIC2S
bulletMAX1R
bulletSAX1R
bulletTBL1S
bulletTEL1S
bulletTNG1S
bulletBRG1R
bulletBAL2S

 

bulletANS1R
bulletCMP1R
bulletPEQ1R
bulletRI01S
bulletMA3 Module Adapter
   
   
   
 
Input Modules
   
LMM1S - Line/MIC Input, Actively Balanced (Screw Terminal)
Gain/Trim control
Bass & Treble controls
Noise gate w/ Threshold control
Line/MIC gain switch
24V Phantom power
Fade back from mute
Priority & bus assignments
Mutes lower priority modules
LMR1S - Line/MIC Input w/ Remote, Actively Balanced (Screw Terminal)
All features of LMM1S
Input level controlled by remote panel or direct voltage
Wall Plate Control included
Limiter with LED activity indicator
 
  
 
MIC1X Image
MIC1X - Microphone Transformer- Balanced (XLR)
Gain/Trim control
Bass & Treble controls
Noise gate w/ Threshold & Duration control
Limiter w/Threshold control
24V Phantom power
Mute send & receive
XLR connector
MIC1S - Microphone Transformer-Balanced (Screw Terminal)
Gain/Trim control
Bass & Treble controls
Noise gate w/ Threshold & Duration control
Limiter w/Threshold control
24V Phantom power
Mute send & receive
Screw terminals
MIC1S Image
 
 
    
MIC2X Image
MIC2X - Microphone Electronic- Balanced (XLR)
Gain/Trim control
Hi-Cut/Lo-Cut controls
Voice Enhancement control
Noise gate w/Threshold control
Limiter w/Threshold control
24V Phantom power
XLR connector
MIC2S - Microphone Electronic- Balanced (Screw Terminal)
Gain/Trim control
Hi-Cut/Lo-Cut controls
Voice Enhancement control
Noise gate w/ Threshold control
Limiter w/Threshold control
24V Phantom power
Screw terminals
MIC2S Image
 
 
   
MAX1R Image
MAX1R - Mono Auxiliary

Unbalanced input module
Gain/Trim control
Bass & Treble controls
Variable ducking level when muted
Fade back from mute
RCA connector
SAX1R - Stereo Auxiliary

Unbalanced input module
Gain/Trim control
Bass & Treble controls
Variable ducking level when muted
Fade back from mute
Stereo-to-mono summing option
RCA connectors
SAX1R Image
 
   
TBL1S Image
TBL1S - Transformer Balanced
Auxiliary
Transformer-isolated line level input
Gain/Trim control
Bass & Treble controls
Variable ducking level when muted
Fade back from mute
Screw terminals
TEL1S - Telephone

Loop start or ground start trunk interfacing (requires external power supply)
Dry loop interface for paging ports
Audio-activated paging in dry loop
Gain/Trim control
Noise gate
Limiter
Screw terminals
TEL1S Image
 
   
TNG1S Image
TNG1S - Tone Generator

Select 4 of 8 tones to trigger
Burst/steady, slow whoop, siren, mechanical bell, Klaxon, night ringer, double chime, & doorbell tones
Momentary & continuous playback modes
Screw terminal trigger connections
Level control
Microprocessor-controlled operation
Screw terminals
BRG1R - Bridging

Gain/Trim control
Ground isolated input
Input signal available at buffered output
Variable ducking level when muted
Fade back from mute
Buffered output not muted
RCA connectors
BRG1R Image

 
 
 
BAL2S Image
BAL2S - Dual-Balanced

Stereo, high-impedance, balanced inputs
Professional-quality, low noise performance
Selectable gain of 0 or 18 dB
Compatible with telephone system page ports
Variable ducking level when muted
Fade back from mute
Screw terminals
 
 

Signal-Processing Output Modules

  
 
ANS1R Image
ANS1R - Ambient Noise Sensor

Maximum gain control
Ramp speed
Activity threshold control
AUX level input control
Stereo unbalanced Aux inputs (electronically summed mono)
Connect up to 4 sensor mics (1 included)
RCA connectors
CMP1R - Compressor/Limiter

Compressor ratio control
Threshold control
Make-up gain control
Bypass switch
Unbalanced input
Gradual fade back from mute for unbalanced input
RCA connectors
CMP1R Image
 
 
   
PEQ1R Image
PEQ1R - Parametric Equalizer

Unbalanced input
4-band equalizer; 2 full parametric bands
Frequency control
'Q' bandwidth & gain controls
Bass & Treble controls
Bypass switch
RCA connectors
RIO1S - Relay Input/Output

Transformer-isolated, balanced line-level input
600-ohm or 10k jumper selectable input impedance
Transformer-isolated, balanced line-level output
8-ohm, 750mW output
Input & output level controls
N.O. or N.C. relay contacts
Screw terminals
RIO1S Image
 
 
 
Module Adapter
  
BAL2S Image
MA3 - Module Adapter

Adapts up to 3 modules for use with older Bogen D-Series, WMA, and DPA Modular Amplifiers
 
(Not required with Bogen M-Class and Power Vector products)